This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 160
Network Working Group                                    D. Crocker, Ed.
Request for Comments: 4234                   Brandenburg InternetWorking
Obsoletes: 2234                                               P. Overell
Category: Standards Track                                      THUS plc.
                                                            October 2005


             Augmented BNF for Syntax Specifications: ABNF

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2005).

Abstract

   Internet technical specifications often need to define a formal
   syntax.  Over the years, a modified version of Backus-Naur Form
   (BNF), called Augmented BNF (ABNF), has been popular among many
   Internet specifications.  The current specification documents ABNF.
   It balances compactness and simplicity, with reasonable
   representational power.  The differences between standard BNF and
   ABNF involve naming rules, repetition, alternatives, order-
   independence, and value ranges.  This specification also supplies
   additional rule definitions and encoding for a core lexical analyzer
   of the type common to several Internet specifications.

Table of Contents

   1. INTRODUCTION ....................................................2
   2. RULE DEFINITION .................................................3
      2.1. Rule Naming ................................................3
      2.2. Rule Form ..................................................3
      2.3. Terminal Values ............................................4
      2.4. External Encodings .........................................5
   3. OPERATORS .......................................................6
      3.1. Concatenation:  Rule1 Rule2 ................................6
      3.2. Alternatives:  Rule1 / Rule2 ...............................6
      3.3. Incremental Alternatives: Rule1 =/ Rule2 ...................7
      3.4. Value Range Alternatives:  %c##-## .........................7
      3.5. Sequence Group:  (Rule1 Rule2) .............................8
      3.6. Variable Repetition:  *Rule ................................8
      3.7. Specific Repetition:  nRule ................................9
      3.8. Optional Sequence:  [RULE] .................................9
      3.9. Comment:  ; Comment ........................................9
      3.10. Operator Precedence .......................................9
   4. ABNF DEFINITION OF ABNF ........................................10
   5. SECURITY CONSIDERATIONS ........................................11
   6. References .....................................................11
      6.1. Normative References ......................................11
      6.2. Informative References ....................................11
   Appendix A.  ACKNOWLEDGEMENTS .....................................13
   Appendix B.  APPENDIX - CORE ABNF OF ABNF .........................13
      B.1.  Core Rules ...............................................13
      B.2.  Common Encoding ..........................................14

1.  INTRODUCTION

   Internet technical specifications often need to define a formal
   syntax and are free to employ whatever notation their authors deem
   useful.  Over the years, a modified version of Backus-Naur Form
   (BNF), called Augmented BNF (ABNF), has been popular among many
   Internet specifications.  It balances compactness and simplicity,
   with reasonable representational power.  In the early days of the
   Arpanet, each specification contained its own definition of ABNF.
   This included the email specifications, [RFC733] and then [RFC822],
   which came to be the common citations for defining ABNF.  The current
   document separates those definitions to permit selective reference.
   Predictably, it also provides some modifications and enhancements.

   The differences between standard BNF and ABNF involve naming rules,
   repetition, alternatives, order-independence, and value ranges.
   Appendix B supplies rule definitions and encoding for a core lexical
   analyzer of the type common to several Internet specifications.  It
   is provided as a convenience and is otherwise separate from the meta

   language defined in the body of this document, and separate from its
   formal status.

   Changes since [RFC2234]:

      In Section 3.7, the phrase: "That is, exactly <N> occurrences of
      <element>." was corrected to: "That is, exactly <n> occurrences of
      <element>."

      Some continuation comment lines needed to be corrected to begin
      with comment character (";").

2.  RULE DEFINITION

2.1.  Rule Naming

   The name of a rule is simply the name itself; that is, a sequence of
   characters, beginning with an alphabetic character, and followed by a
   combination of alphabetics, digits, and hyphens (dashes).

   NOTE:

      Rule names are case-insensitive

   The names <rulename>, <Rulename>, <RULENAME>, and <rUlENamE> all
   refer to the same rule.

   Unlike original BNF, angle brackets ("<", ">") are not required.
   However, angle brackets may be used around a rule name whenever their
   presence facilitates in discerning the use of a rule name.  This is
   typically restricted to rule name references in free-form prose, or
   to distinguish partial rules that combine into a string not separated
   by white space, such as shown in the discussion about repetition,
   below.

2.2.  Rule Form

   A rule is defined by the following sequence:

         name =  elements crlf

   where <name> is the name of the rule, <elements> is one or more rule
   names or terminal specifications, and <crlf> is the end-of-line
   indicator (carriage return followed by line feed).  The equal sign
   separates the name from the definition of the rule.  The elements
   form a sequence of one or more rule names and/or value definitions,
   combined according to the various operators defined in this document,
   such as alternative and repetition.

   For visual ease, rule definitions are left aligned.  When a rule
   requires multiple lines, the continuation lines are indented.  The
   left alignment and indentation are relative to the first lines of the
   ABNF rules and need not match the left margin of the document.

2.3.  Terminal Values

   Rules resolve into a string of terminal values, sometimes called
   characters.  In ABNF, a character is merely a non-negative integer.
   In certain contexts, a specific mapping (encoding) of values into a
   character set (such as ASCII) will be specified.

   Terminals are specified by one or more numeric characters, with the
   base interpretation of those characters indicated explicitly.  The
   following bases are currently defined:

         b           =  binary

         d           =  decimal

         x           =  hexadecimal

   Hence:

         CR          =  %d13

         CR          =  %x0D

   respectively specify the decimal and hexadecimal representation of
   [US-ASCII] for carriage return.

   A concatenated string of such values is specified compactly, using a
   period (".") to indicate a separation of characters within that
   value.  Hence:

         CRLF        =  %d13.10

   ABNF permits the specification of literal text strings directly,
   enclosed in quotation-marks.  Hence:

         command     =  "command string"

   Literal text strings are interpreted as a concatenated set of
   printable characters.

   NOTE:

      ABNF strings are case-insensitive and the character set for these
      strings is us-ascii.

   Hence:

         rulename = "abc"

   and:

         rulename = "aBc"

   will match "abc", "Abc", "aBc", "abC", "ABc", "aBC", "AbC", and
   "ABC".

      To specify a rule that IS case SENSITIVE, specify the characters
      individually.

   For example:

         rulename    =  %d97 %d98 %d99

   or

         rulename    =  %d97.98.99

   will match only the string that comprises only the lowercased
   characters, abc.

2.4.  External Encodings

   External representations of terminal value characters will vary
   according to constraints in the storage or transmission environment.
   Hence, the same ABNF-based grammar may have multiple external
   encodings, such as one for a 7-bit US-ASCII environment, another for
   a binary octet environment, and still a different one when 16-bit
   Unicode is used.  Encoding details are beyond the scope of ABNF,
   although Appendix A (Core) provides definitions for a 7-bit US-ASCII
   environment as has been common to much of the Internet.

   By separating external encoding from the syntax, it is intended that
   alternate encoding environments can be used for the same syntax.

3.  OPERATORS

3.1.  Concatenation:  Rule1 Rule2

EID 160 (Verified) is as follows:

Section: 3.1

Original Text:

         Strings, Names formation

         Comment

         Value range

         Repetition

         Grouping, Optional

         Concatenation

         Alternative

Corrected Text:

         Strings, Names formation

         Comment

         Value range

         Grouping, Optional

         Repetition

         Concatenation

         Alternative

Notes:
This re-ordering aligns the table with the prose description and the
meta-grammar in section 4.
A rule can define a simple, ordered string of values (i.e., a concatenation of contiguous characters) by listing a sequence of rule names. For example: foo = %x61 ; a bar = %x62 ; b mumble = foo bar foo So that the rule <mumble> matches the lowercase string "aba". LINEAR WHITE SPACE: Concatenation is at the core of the ABNF parsing model. A string of contiguous characters (values) is parsed according to the rules defined in ABNF. For Internet specifications, there is some history of permitting linear white space (space and horizontal tab) to be freely and implicitly interspersed around major constructs, such as delimiting special characters or atomic strings. NOTE: This specification for ABNF does not provide for implicit specification of linear white space. Any grammar that wishes to permit linear white space around delimiters or string segments must specify it explicitly. It is often useful to provide for such white space in "core" rules that are then used variously among higher-level rules. The "core" rules might be formed into a lexical analyzer or simply be part of the main ruleset. 3.2. Alternatives: Rule1 / Rule2 Elements separated by a forward slash ("/") are alternatives. Therefore, foo / bar will accept <foo> or <bar>. NOTE: A quoted string containing alphabetic characters is a special form for specifying alternative characters and is interpreted as a non-terminal representing the set of combinatorial strings with the contained characters, in the specified order but with any mixture of upper and lower case. 3.3. Incremental Alternatives: Rule1 =/ Rule2 It is sometimes convenient to specify a list of alternatives in fragments. That is, an initial rule may match one or more alternatives, with later rule definitions adding to the set of alternatives. This is particularly useful for otherwise, independent specifications that derive from the same parent rule set, such as often occurs with parameter lists. ABNF permits this incremental definition through the construct: oldrule =/ additional-alternatives So that the rule set ruleset = alt1 / alt2 ruleset =/ alt3 ruleset =/ alt4 / alt5 is the same as specifying ruleset = alt1 / alt2 / alt3 / alt4 / alt5 3.4. Value Range Alternatives: %c##-## A range of alternative numeric values can be specified compactly, using dash ("-") to indicate the range of alternative values. Hence: DIGIT = %x30-39 is equivalent to: DIGIT = "0" / "1" / "2" / "3" / "4" / "5" / "6" / "7" / "8" / "9" Concatenated numeric values and numeric value ranges cannot be specified in the same string. A numeric value may use the dotted notation for concatenation or it may use the dash notation to specify one value range. Hence, to specify one printable character between end of line sequences, the specification could be: char-line = %x0D.0A %x20-7E %x0D.0A 3.5. Sequence Group: (Rule1 Rule2) Elements enclosed in parentheses are treated as a single element, whose contents are STRICTLY ORDERED. Thus, elem (foo / bar) blat matches (elem foo blat) or (elem bar blat), and elem foo / bar blat matches (elem foo) or (bar blat). NOTE: It is strongly advised that grouping notation be used, rather than relying on the proper reading of "bare" alternations, when alternatives consist of multiple rule names or literals. Hence, it is recommended that the following form be used: (elem foo) / (bar blat) It will avoid misinterpretation by casual readers. The sequence group notation is also used within free text to set off an element sequence from the prose. 3.6. Variable Repetition: *Rule The operator "*" preceding an element indicates repetition. The full form is: <a>*<b>element where <a> and <b> are optional decimal values, indicating at least <a> and at most <b> occurrences of the element. Default values are 0 and infinity so that *<element> allows any number, including zero; 1*<element> requires at least one; 3*3<element> allows exactly 3 and 1*2<element> allows one or two. 3.7. Specific Repetition: nRule A rule of the form: <n>element is equivalent to <n>*<n>element That is, exactly <n> occurrences of <element>. Thus, 2DIGIT is a 2- digit number, and 3ALPHA is a string of three alphabetic characters. 3.8. Optional Sequence: [RULE] Square brackets enclose an optional element sequence: [foo bar] is equivalent to *1(foo bar). 3.9. Comment: ; Comment A semi-colon starts a comment that continues to the end of line. This is a simple way of including useful notes in parallel with the specifications. 3.10. Operator Precedence The various mechanisms described above have the following precedence, from highest (binding tightest) at the top, to lowest (loosest) at the bottom: Strings, Names formation Comment Value range Repetition Grouping, Optional Concatenation Alternative Use of the alternative operator, freely mixed with concatenations, can be confusing. Again, it is recommended that the grouping operator be used to make explicit concatenation groups. 4. ABNF DEFINITION OF ABNF NOTES: 1. This syntax requires a formatting of rules that is relatively strict. Hence, the version of a ruleset included in a specification might need preprocessing to ensure that it can be interpreted by an ABNF parser. 2. This syntax uses the rules provided in Appendix B (Core). rulelist = 1*( rule / (*c-wsp c-nl) ) rule = rulename defined-as elements c-nl ; continues if next line starts ; with white space rulename = ALPHA *(ALPHA / DIGIT / "-") defined-as = *c-wsp ("=" / "=/") *c-wsp ; basic rules definition and ; incremental alternatives elements = alternation *c-wsp c-wsp = WSP / (c-nl WSP) c-nl = comment / CRLF ; comment or newline comment = ";" *(WSP / VCHAR) CRLF alternation = concatenation *(*c-wsp "/" *c-wsp concatenation) concatenation = repetition *(1*c-wsp repetition) repetition = [repeat] element repeat = 1*DIGIT / (*DIGIT "*" *DIGIT) element = rulename / group / option / char-val / num-val / prose-val group = "(" *c-wsp alternation *c-wsp ")" option = "[" *c-wsp alternation *c-wsp "]" char-val = DQUOTE *(%x20-21 / %x23-7E) DQUOTE ; quoted string of SP and VCHAR ; without DQUOTE num-val = "%" (bin-val / dec-val / hex-val) bin-val = "b" 1*BIT [ 1*("." 1*BIT) / ("-" 1*BIT) ] ; series of concatenated bit values ; or single ONEOF range dec-val = "d" 1*DIGIT [ 1*("." 1*DIGIT) / ("-" 1*DIGIT) ] hex-val = "x" 1*HEXDIG [ 1*("." 1*HEXDIG) / ("-" 1*HEXDIG) ] prose-val = "<" *(%x20-3D / %x3F-7E) ">" ; bracketed string of SP and VCHAR ; without angles ; prose description, to be used as ; last resort 5. SECURITY CONSIDERATIONS Security is truly believed to be irrelevant to this document. 6. References 6.1. Normative References [US-ASCII] American National Standards Institute, "Coded Character Set -- 7-bit American Standard Code for Information Interchange", ANSI X3.4, 1986. 6.2. Informative References [RFC2234] Crocker, D. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", RFC 2234, November 1997. [RFC733] Crocker, D., Vittal, J., Pogran, K., and D. Henderson, "Standard for the format of ARPA network text messages", RFC 733, November 1977. [RFC822] Crocker, D., "Standard for the format of ARPA Internet text messages", STD 11, RFC 822, August 1982. Appendix A. ACKNOWLEDGEMENTS The syntax for ABNF was originally specified in RFC 733. Ken L. Harrenstien, of SRI International, was responsible for re-coding the BNF into an augmented BNF that makes the representation smaller and easier to understand. This recent project began as a simple effort to cull out the portion of RFC 822 that has been repeatedly cited by non-email specification writers, namely the description of augmented BNF. Rather than simply and blindly converting the existing text into a separate document, the working group chose to give careful consideration to the deficiencies, as well as benefits, of the existing specification and related specifications made available over the last 15 years, and therefore to pursue enhancement. This turned the project into something rather more ambitious than was first intended. Interestingly, the result is not massively different from that original, although decisions, such as removing the list notation, came as a surprise. This "separated" version of the specification was part of the DRUMS working group, with significant contributions from Jerome Abela, Harald Alvestrand, Robert Elz, Roger Fajman, Aviva Garrett, Tom Harsch, Dan Kohn, Bill McQuillan, Keith Moore, Chris Newman, Pete Resnick, and Henning Schulzrinne. Julian Reschke warrants a special thanks for converting the Draft Standard version to XML source form. Appendix B. APPENDIX - CORE ABNF OF ABNF This Appendix is provided as a convenient core for specific grammars. The definitions may be used as a core set of rules. B.1. Core Rules Certain basic rules are in uppercase, such as SP, HTAB, CRLF, DIGIT, ALPHA, etc. ALPHA = %x41-5A / %x61-7A ; A-Z / a-z BIT = "0" / "1" CHAR = %x01-7F ; any 7-bit US-ASCII character, ; excluding NUL CR = %x0D ; carriage return CRLF = CR LF ; Internet standard newline CTL = %x00-1F / %x7F ; controls DIGIT = %x30-39 ; 0-9 DQUOTE = %x22 ; " (Double Quote) HEXDIG = DIGIT / "A" / "B" / "C" / "D" / "E" / "F" HTAB = %x09 ; horizontal tab LF = %x0A ; linefeed LWSP = *(WSP / CRLF WSP) ; linear white space (past newline) OCTET = %x00-FF ; 8 bits of data SP = %x20 VCHAR = %x21-7E ; visible (printing) characters WSP = SP / HTAB ; white space B.2. Common Encoding Externally, data are represented as "network virtual ASCII" (namely, 7-bit US-ASCII in an 8-bit field), with the high (8th) bit set to zero. A string of values is in "network byte order", in which the higher-valued bytes are represented on the left-hand side and are sent over the network first. Authors' Addresses Dave Crocker (editor) Brandenburg InternetWorking 675 Spruce Dr. Sunnyvale, CA 94086 US Phone: +1.408.246.8253 EMail: dcrocker@bbiw.net Paul Overell THUS plc. 1/2 Berkeley Square 99 Berkeley Street Glasgow G3 7HR UK EMail: paul.overell@thus.net Full Copyright Statement Copyright (C) The Internet Society (2005). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf- ipr@ietf.org. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society.